Fisheye interface- PTZ
See general Luma x20 PTZ settings here.
Warning: If your camera is wall mounted, ePTZ controls may not behave as expected. This will be resolved with a future firmware update.
PTZ Control
Click 
to display the PTZ control panel.
|
Icon |
Description |
Icon |
Description |
|---|---|---|---|
|
|
Move upper left |
|
Move upper right |
|
|
Move up |
|
Stop movement |
|
|
Move left |
|
Move right |
|
|
Move lower left |
|
Move lower right |
|
|
Move down |
|
Speed adjustment |
|
|
Zoom out |
|
Zoom in |
|
|
Automatic cruise |
|
Preset |
|
|
Create and call cruise |
|
|
Preset Configuration
1. Select the Preset from the preset list on the right.
2. Click 
to save the preset position.
3. Click 
to call the set preset.
4. Select the set preset and click 
to delete the preset as needed.
Cruise Configuration
1. Click 
to being cruise creation.
2. Click 
to add the cruise.
3. Enter the cruise name and click Add Preset.
3. Select the preset name and time and click OK.
4. Click OK again to save the settings.
4. Select the cruise and click 
to begin the cruise.
5. Click 
to stop the cruise.
6. Click 
to modify the cruise and to delete it.
See all fisheye special features here.